Products      
Referred Clients      
Inquiry        
Contact us         
 
 S. 160 series
 S. 170 Series
 Accessories
 Installation Diagram
 Quatro LNB
   Products > EMP Satellite Switches> S.150 Series
   
 

S. 155-CP  (9 in, 8 Out)

Multiswitch (13/18Volt, 0/22kHz) with integrated power supply, 0 to 15 dB attenuators, Quad LNB compatible, AP - passive terr. input; CP - active terr. Input, with a built-in amplifier for terrestrial input.

This multiswitch allows connection of 8 different LNBs signals (polarities). Input level can be set by attenuators in range of 15 dB. Using a built-in switch, it is also possible to send the command "22kHz" or DiSEqC 1.0 Write N0 command "High Band" to selected SAT inputs for high band continuously; in this case it is possible to connect also Twin Universal or Quad LNBs to the inputs.

   Specifications of S. 155-CP

  Frequency Range

  LNB-Inputs

 950-2300 MHz

 Terr. Input

 40-862 MHz

 Outputs

 40-2300 MHz

  Control

 

 DiSEqC Commands or (10-14.5 /  15.5-20 V + 0/22 kHz
 + Tone Burst)

  Insertion Loss

 950-2300  MHz

 0 dB avg.

 40-862  MHz

 0 dB avg.

  SAT Inputs Isolation

 

 30 dB avg.

  Maximum Input Level*

  Sat.

 105 dBµV

 Terr.

 82 dBµV

  Power Consumption (incl.   connected LNBs)

 

 45 VA max.

  LNB Power Supply

 

 1400 mA max.

  Dimensions (w,d,h [cm])

 

 31.7 x 15.2 x 8.0

  Temperature Range

 

 –25 °C - +60 °C

 
 
Examples Of Utilization:

    *Terr.: EN 50083-3/60dB IMAł [dBµV]; SAT: EN 50083-3/35dB IMAł [dBµV]

      

 

S. 150-CP-12 (9 in, 12 Out)

Multiswitch (13/18Volt, 0/22kHz) with integrated power supply, 0 to 15 dB attenuators, Quad LNB compatible, AP - passive terr. input; CP - active terr. Input, with a built-in amplifier for terrestrial input.

This multiswitch allows connection of 8 different LNBs signals (polarities). Input level can be set by attenuators in range of 15 dB. Using a built-in switch, it is also possible to send the command "22kHz" or DiSEqC 1.0 Write N0 command "High Band" to selected SAT inputs for high band continuously; in this case it is possible to connect also Twin Universal or Quad LNBs to the inputs.

      The same as S.150-AP-12, but with a built in amplifier for terrestrial input.

   Specifications of S. 150-CP-12

 Frequency Range

 LNB-Inputs

 950-300 MHz

 Terr. Input

 40-862 MHz

 Outputs

 40-2300 MHz

 Control

 

 DiSEqC Commands or (10-14.5 / 15.5-20 V  + 0/22 kHz
 + Tone Burst)

 Insertion Loss

 950-2300  MHz

 5 dB avg.

 40-862 MHz

 2 dB avg.

 SAT Inputs Isolation

 

 20 dB min.

 Maximum Input Level*

 Sat.

 95 dBµV

 Terr.

 110 dBµV

 Power Consumption (incl.  connected LNBs)

 

 45 VA max.

 LNB Power Supply

 

 1600 mA max.

 Dimensions (w,d,h [cm])

 

 43.6 x 15.2 x 8.0

 Temperature Range

 

 –25 °C - +60 °C

 
 
Examples Of Utilization:

        *Terr.: EN 50083-3/60dB IMAł [dBµV]; SAT: EN 50083-3/35dB IMAł [dBµV]

      

 

 

S. 150-CP-16  (9 in, 16 Out)

Multiswitch (13/18Volt, 0/22kHz) with integrated power supply, 0 to 15 dB attenuators, Quad LNB compatible, AP - passive terr. input; CP - active terr. Input, with a built-in amplifier for terrestrial input.

This multiswitch allows connection of 8 different LNBs signals (polarities). Input level can be set by attenuators in range of 15 dB. Using a built-in switch, it is also possible to send the command "22kHz" or DiSEqC 1.0 Write N0 command "High Band" to selected SAT inputs for high band continuously; in this case it is possible to connect also Twin Universal or Quad LNBs to the inputs.

    Specifications of S. 150-CP-16

 Frequency Range

 LNB-Inputs

 950-300 MHz

 Terr. Input

 40-862 MHz

 Outputs

 40-2300 MHz

 Control

 

 DiSEqC Commands or (10-14.5 /  15.5-20 V + 0/22 kHz
 + Tone Burst)

 Insertion Loss

 950-2300  MHz

 5 dB avg.

 40-862  MHz

 4 dB avg.

 SAT Inputs Isolation

 

 20 dB min.

 Maximum Input Level*

 Sat.

 95 dBµV

 Terr.

 82 dBµV

 Power Consumption (incl.  connected LNBs)

 

 45 VA max.

 LNB Power Supply

 

 1600 mA max.

 Dimensions (w,d,h [cm])

 

 43.6 x 15.2 x 8.0

 Temperature Range

 

 –25 °C - +60 °C

 
 
Examples Of Utilization:

    *Terr.: EN 50083-3/60dB IMAł [dBµV]; SAT: EN 50083-3/35dB IMAł [dBµV]

      
 
Copyright © 2007 Albarq Technical Co.